Home Improvement Website

Safety Tips for Power Tools

July 21, 2014 by · Leave a Comment 

Before you begin operating a power tool, it’s important that you follow the manufacturer’s intended directions. Playing it safe isn’t just about self-preservation either. Following the manufacturer’s directions will ensure the tool survives for many years to come. Here are some safety tips to help protect you, your garage and your tools.


When you’re about to use a cordless drill, stop and think about what you’re wearing. Baggy clothing can easily get caught in the moving parts of a drill. Take off any loose fitting jewelry, and tie back long hair if you happen to have it. Use shirts that are short-sleeved, and avoid wearing necklaces and other objects that hang. Safety goggles are also useful for those looking to use power tools. They will guard your eyes from loose debris, while a face mask will protect your respiratory system. Material like wood and fiberglass can create lots of dust that you could unintentionally inhale. The last bit of advice is to check your gloves. Loose gloves can also get caught in the drill, so protect your hands with gloves that actually fit.

Work Area

When it comes to work on your project, clear a space on your workbench that gives you plenty of room to move around. If you are working with wood or metal, secure it with a vice grip or a weight to keep the object from moving. You can also use your drill to make what’s called a “pilot hole,” which makes it easier to drill into a project. You also apply less pressure to the drill, which reduces the risk of slippage. You can use a small air compressor to blow away any debris that remains, and a quick sweep of the floor will keep your workspace clean after work is done.


The first thing you need to do when you begin your project is to set the drill bit properly. Place the drill bit carefully into the chuck, and be sure that it is pointing straight up in the air. Failure to do this important step will cause your drill to slip or bore holes you don’t intend on. You should also consider a drill stand to lock the drill into place.

Final Thoughts

Power tools make most of your housework convenient, but you have to be careful before you operate them. Consider investing in some equipment to make your garage and workspace safer.
Toolsmith Direct is a tool retailer that offers brand names like Kawasaki and Trades Pro. Visit Toolsmith Direct for great deals in time for summer projects.

When should you install floor heating?

July 17, 2014 by · Leave a Comment 

Written by EZ Floor Heat

When it comes to floor heating, there are a few questions that you need to ask yourself before you make your investment. Perhaps the most important question you need to ask yourself is this, “do you live in a place that experiences cold to freezing weather?” you also need to ask “what type of flooring do I want to have in my home?” These are the two biggest questions you need to ask yourself if you are planning on installing floor heating. So, from what we have right now, it’s quite clear that floor heating is ideal for homes that are located in areas that experience cold weather. And we’re not just talking about a few weeks of winter, we’re talking about months of cold weather. This is where you will need floor heating, and it’s not even considered as a luxury if you live in places like these, it would be more of a necessity as different types of floor materials react more to cold weather conditions. The next part of the question is “where should I put my floor heating?” this question now delves upon where the best place is for you to put floor heating in your home. The rule of thumb here is that if you have carpet flooring installed in your home, you should stay away from floor heating because it would create conditions conducive for bacteria to grow. Instead, install floor heating in places in your home that uses tiles, terrazzo, or even cement.


Underfloor heating may just be what you exactly need. If you live in places where it’s practically winter all year long, this is just what the doctor ordered.

Outdoor parties and air conditioners

July 16, 2014 by · Leave a Comment 

Written by MovinCool

If you’re thinking about hosting a dinner party right smack in the middle of summer, you are going to need to make sure that you have some way to keep your guests relaxed and entertained. And one of the important things that you need to consider here is the fact that temperature and air quality must always be checked. If you expect warm temperatures to come, you can have a rental portable air conditioner set up in your backyard. It’s just like computer cooling ,if your computer get’s too warm, it won’t be able to function properly. That same analogy also holds true among your guests at outdoor parties. If you don’t have portable air conditioners or large fans to ensure that there’s enough cold air to go around so they can stay comfortable and enjoy the rest of the outdoor party as well. Being the host of such an event, you need to make sure that you have all your angles and bases covered. You don’t want them to be freezing either, so you just have to make sure your guests  would be able to enjoy room temperature or a temperature that’s slightly below room temperature to make things cool and crisp. A portable air conditioner and fans are the perfect allies for you in this battle, all you need to do is to know what the ideal room temperature would be. Next, you need to avoid fans that are so powerful that would make people uncomfortable too.


You’re not the only one looking for a portable a/c. with such a handy and practical purchase like that , you need to buy it from the best guys.

Tips on Buying Artificial Grass for Your Deck

July 15, 2014 by · Leave a Comment 

Written by Artificial Turf Supply Commercial & Residential Division

Are you thinking about installing fake grass on your deck? Synthetic turf is a beautiful flooring material that can be used to enhance decks and patios. However, not all fake grass looks great on decks. Some are better suited for indoor projects while other models are designed for lawns. To find the right turf for your deck, follow these helpful tips:

Look for outdoor-ready synthetic turf. Durability is an important factor when shopping for synthetic turf for your deck. It’s important to find turf that has been designed for the great outdoors. This means it must UV-resistant, so that it won’t deteriorate or fade in the sun. Outdoor-ready turf should also be durable enough to withstand rain, wind, and heat.

Say yes to one color. There are many styles of fake grass, including beautiful three- and four-toned models that look beautiful in the front or back yard. However, these models are best suited for lawns and landscaping. When it comes to flooring for your deck, you don’t necessarily want the flooring to look like grass. Instead, go for a single hue such as emerald or olive green.

Go for the soft stuff. The deck should be a comfortable place where friends and family can gather, chat, and relax. To create a comfortable carpet underfoot, purchase high-quality synthetic turf that is soft to the touch. Unlike low-quality synthetic lawn products, the good stuff shouldn’t feel like plastic.

Artificial Turf Supply Commercial & Residential Division provides synthetic lawns for homeowners and businesses.

Replacing cushions as an alternative to buying new furniture

July 15, 2014 by · Leave a Comment 

Written by Carlo Badalamenti

New cushions, to tell you the truth, might just be the very thing that you need instead of having to buy new furniture. You see, buying new furniture can cost you a few hundred dollars to thousands of dollars as well depending on the type of furniture you buy. Now that is a lot of money considering the fact that the furniture you will be buying may not be a necessity. So, how do you go about your furniture then? You should decide depending on the size of your bank balance and your capacity to earn income as well. If you’re earning slightly above minimum wage and you want to buy a piece of furniture that costs about two thousand dollars, don’t you think there’s something wrong in the picture? Clearly, you’re buying something that you can barely afford. Instead, why not take a second look at the furniture that you have and see if all you need to do is just to replace old cushions? Whether you have ripped up upholstery or you have springs sticking out in some places, the point is that you can fix that. Buying brand new is not the solution to everything. As a matter of fact, you might just even be adding to your problems by incurring more debt than you can handle. And that’s something you do not want upon yourself. So go to a department store and ask about replacement cushions, in fact they would also have upholstery readily available for you as well.


The Foam Factoryis definitely a godsend when it comes to shopping for pillows, cushions and everything else in between. Replacement cushions are also quite affordable when you buy them here.

Common Problems When Building a House

July 8, 2014 by · Leave a Comment 

Written by: Lyle Charles

You’ve gathered all of your materials, you’ve spoken with and hired the right crew. What could go wrong? Well, as it turns out, lots of things can go wrong on a construction site. Before you begin work on a new house, try these tips to make all phases of construction go smoothly.


Lots of issues can creep up in the planning phase of any major construction project. The most obvious dispute deals with time frame. A builder will estimate the time it takes to complete a project, working through all foreseeable consequences, but unintended problems happen all the time. Delays in getting materials, or delays in finding manpower are quite common. While these challenges are understandable, they still create serious hiccups in the construction process. Companies like Lyle Charles Consulting will often monitor schedules, and will go over any potential liabilities that can cause hiccups in the process.

Don’t forget that these issues extend beyond the house itself. There may be delays while engineers run tests on the soil of an area, or investigate the integrity of a home’s foundation. Demolition presents even greater problems, as there is usually debris that needs clearing before the project can begin.


The acquisition of supplies can create even greater challenges to construction projects. It can be difficult to acquire a certain kind of metal, depending on scarcity. Limited supplies of wood often cause delays while companies scramble to find a more reliable supplier. In these situations, it helps to use a steel fabrication expert to identify the materials, and to make sure that the structure is built to code.


Costs are an important factor to consider. Costs directly impact both the quality and time of the job. AS costs go up, quality increases. Lower costs often mean lower quality materials, shoddy work and a job that takes longer. A construction claims consultant can help you set a reasonable cost for your project by evaluating all potential aspects of construction. They can help you find reasonably priced crews, and choose low-cost and high value materials. They can even help in the planning stages, consulting on blue prints or foundation

Other Disputes

Injuries on the job can also lead to disputes, which is why you might consider insurance for the job before work begins. Injuries can be costly, and may eat a lot of your time before and after the project.

5 Tell-Tale Signs That Your Home’s Air Filters Needs to Be Changed

July 1, 2014 by · Leave a Comment 

Written by: Your Filter Connection

If you’re at all concerned with your indoor air quality as well as the health of your HVAC system, changing air filters should be a priority. Sadly, few homeowners change their air filters as often as they should. The following indicators can signal the need for new HVAC filters in a residential or commercial property.

Dirty Vent Slats

Easily the most obvious sign that a home filter needs to be changed is an accumulation of dust and grime around output vents. If you run your hand along an interior vent and find it dirty, chances are good that your filters have reached their limit. Be sure to swap out intake and output filters when this scenario occurs.

Start-Up Smells

If you notice a funky odor when your HVAC first kicks on, it may signal the need to change air vent and furnace filters. You should trust your nose above all else to tell you that your filters are on the downswing. If you encounter a persistent smell that doesn’t seem right, it’s likely that your filters are shot.

Loss of Pressure

If a filter is clogged up with a lot of debris, you’ll experience a noticeable drop in HVAC pressure and throughput. Filters with high MERV ratings are especially prone to rapid clogging due to their effectiveness. While this could be due to leaks in the duct work, it’s more likely that you simply need to change your filters.

HVAC Working Overtime

An inefficient HVAC system is both a health hazard and a waste of energy. Blocked home air filter hardware doesn’t help matters any by forcing an AC or HVAC system to work harder than it should have to. If your HVAC appears to be struggling to keep up with demand, it’s probably time to change those filters.

Respiratory Side Effects

Whether you prefer an electrostatic air filter or a standard fiberglass HEPA model, the ultimate end goal is to produce the cleanest air possible. Oftentimes, your senses are the best barometer for how dirty your filters really are. If you’re experiencing sinus and allergy problems, it’s probably a good idea to change out your old filters as soon as possible.

Don’t Skimp on Quality

If some or all of the aforementioned symptoms pop up, it’s likely that a filter change is in order. A good rule of thumb is to change your filters every three to four months under normal circumstances to avoid sub-par air quality. In any event, always be sure to choose high-quality heater filters from reputable manufacturers to ensure the best results.