Home Improvement Website

Avoiding Construction Delay Claims

April 23, 2015 by · Leave a Comment 

Written by: Lyle Charles

It’s no secret that the construction industry costs money before you can make money, but there should be a limit to the amount of needless spending that a project accumulates. Every time a project planner puts together a change for the plans, or if supplies fail to arrive on time, the owner of the project will end up paying more than what they have anticipated. Fortunately, there are some simple steps you can take to manage construction claim preparation efficiently or avoid them altogether.

Proper Documentation

One of the common problems crews run into is documentation. For inexperienced crews, documentation can often take a back seat to getting actual work done. Construction consultants have to be excellent record keepers because those documents will come back during a dispute. Documents outline everything, from the project plan to contracts for specific materials. Failure to track your documents is a liability, and will end up costing you in the long run. It may not be this project, but sooner or later you’re going to need to show proof that you have done something or ordered something. Documentation is crucial.

Scheduling in Advance

Another common problem on construction sites is the issue of getting schedules done well enough in advance to predict what might change on the ground. If you work in an area with four seasons, for instance, you might need to plan for days where you’ll be snowed in. There are also excessive overtime requests that could result in “over manpower.” It’s not easy to judge how much manpower you’ll need throughout the project, and you can’t predict which deadlines will present the most stress.

A good project manager needs to balance the deadline for a project, and structure operations so that nothing overlaps or lags. Every day that construction can’t happen is a day that everyone loses money. You should also consider scheduling inspectors, especially for permit issuing, well in advance and plan your changes accordingly. Even seemingly small changes may necessitate a new inspection.

Final Thoughts

Construction claims management is both an art and a science. Every case will present new challenges, but much of the conflict boils down to the same thing. The disputes differ only in detail most times. That’s why good consultants can save crews money and time. They know which documents to keep, how to create a solid filing system, and they can offer advice on scheduling that might not otherwise occur to the project manager.

Ways to Repair Your Water-Damaged Home

April 20, 2015 by · Leave a Comment 

Everyone wants to protect their investments, and there are fewer investments that require more preparation and cause more anxiety than property ownership. If your home or property has been subjected to significant damage from humidity or water, it’s important to take the correct precautions to ensure water damage restoration prevents mold and fixes the problem. Remember that if the original long term problem is not addressed, you might suffer long-term damage. What follows are some steps and precautions to consider as you investigate the paths to water damage restoration.

Prepare Adequately

When assessing a property’s water damage, you should first follow a few general precautions to ensure your own safety. If your property was damaged by flooding, make sure you turn off the property’s power and gas before entering it. Be careful not to inhale or drink water while inspecting the property—sewage or otherwise tainted water carries contaminants that could be hazardous to your health. Wash your face, hands, eyes, and mouth after inspecting the property; use disinfectants when possible. As a final precaution, photograph the property damage as thoroughly as you can—the documentation of the damage may prove crucial for insurance negotiations.

Evaluate Damaged Building Materials

Buildings and structures are made out of a variety of materials, and each material reacts differently when exposed to water for a significant period of time. Insulation, for example, retains water well, and can cause further damage if not immediately removed. Plaster walls can be salvaged if damaged by clean water, while drywalls might require complete replacement if exposed, if even for a short period of time. Do you need fan coil units to regulate temperature? That can be an issue in environments that must remain temperature regulated.

In short, a property is an ecosystem of materials that can be thrown drastically out of balance when exposed to a foreign element such as water. The priority, in this case, is to remove said element from the equation. If possible, open windows, wash down wooden surfaces, clean out mud, and drain water from the walls (while being sure to avoid electrical wiring). Choose carefully how you decide to dry wood floors, as they are prone to warping if dried too rapidly.

Consider Dehumidification                                    

Once the area has been investigated, evaluated, and cleaned, it’s time to consider dehumidification as a solution to moisture removal. Portable dehumidifiers prevent water damage, help eliminate odors, stop mold from growing, and come in a large variety of sizes.
MovinCool specializes in industrial heating or cooling systems designed to regulate temperatures in office environments, server rooms and other areas that require special considerations.

What to do if your sofa foam Is severely damaged

April 16, 2015 by · Leave a Comment 

Written by The Foam Factory

With some years of use, your sofa foam would inevitably start showing signs of decline in its shape and texture. Deterioration in your sofa foam would be seen and felt instantly. This is characterized by the foam not holding up its shape and not providing adequate support to the body when sat on.

Apart from being unpleasant to look at, a severely damaged sofa foam can lead to various physical discomforts such as pains in the back, neck and legs. If you are not considering going for a change of sofa, you could compensate the lack of support by placing new cushions on the furniture. The cushions would make for the loss in bounciness in the couch. Alternatively, you might also keep the sofa upholstery as it is and go for a foam replacement.

Carlo Badalamenti has throughout his career, acquired extensive experience in foam products. The foam replacement project can either be carried out on your own or you could seek the advice of professionals. Carrying out such a DIY project yourself is quite gratifying but would be requiring some minimum skills in cutting open the sofa and accurately measuring down the size of foam needed.

Most companies now offer the possibility of having the foam custom-cut to fit the dimension of your project. You would therefore just need to assemble the pieces to get the sofa back up once the new foam is received.

The Foam Factory specializes in providing foam for various projects including sofa foam replacements.

Carrying Out Entry Door Repair

April 11, 2015 by · Leave a Comment 

Written by ETO Doors

Entry doors are subject to various abuses, be it from the weather or from wear. Moreover, passing large objects in and out of the house could have damaging effects on the door. The functioning of exterior wood doors are also prone to damages from the cold, rain, heat and snow. The factors that would need to be focused on are the alignment and adjustment of the door, the malfunctioning of the hardware and wearing out of the weatherstrip.

Rusty Hinges

Doors are usually supported by hinges. There are generally three or four of these on exterior doors. Hinges might be subject to rust quickly and start binding, which makes it difficult for the door to be closed. Moreover, rusty hinges tend to make a lot of noise. In order to solve this issue, you might either consider lubricating and replacing the hinges.

Door Knob

A way to revamp the appearance of a door is to replace the door knob. The front door looks better with oversized knobs. These are aesthetically pleasing and makes it easy to locate the knob. For the entry door, the knob can be chosen in a material that would not be prone to rust such as stainless steel or copper.


Varnish comes in different forms whether transparent, a protective film or a hard coating. Depending on the finish that your door already has, a new layer of varnish would instantly provide a new look to the door.

ETO Doors proposes a large choice of doors for the indoors and outdoors. Some of their product offerings also include front doors.